These values are displayed in Device Manager under Location on the General tab. Open the property page for the network adapter, and make a note of the bus number, device number, and function number. To specify the bus parameters, Open Device Manager, and locate the network adapter that you want to use for debugging. Bus specifies the bus number, Device specifies the device number, and Function specifies the function number.
In most situations, the KDNET transport works best when this option is not set, and DHCP is enabled. The nodhcp option should only be used if you know that there are no DHCP servers on the network. This option is rarely required as even small routers provide support for DHCP. Setting nodhcp prevents use of DHCP to obtain the target IP address.
Do not specify this parameter if you have specified a KEY parameter.
Should be 49152 or higher.įor network debugging specifies that a new encryption key should be generated for the connection. Do not specify this parameter if you have specified the newkey parameter.įor network debugging, specifies the port to communicate with on the host debugger. The target computer must have a network adapter that is supported by Debugging Tools for Windows.įor network debugging, specifies the IP address of the host debugger.įor network debugging, specifies the key with which to encrypt the connection. When this option is used, the HOSTIP and PORT parameters must be included as well. Specifies that the target machine and the host machine will use an Ethernet network connection for debugging.
#Target disk mode ethernet serial
bcdedit /dbgsettings NET HOSTIP:ip PORT:port īcdedit /dbgsettings LOCAL īcdedit /dbgsettings SERIAL īcdedit /dbgsettings USB īcdedit /dbgsettings 1394 NOTE: The 1394 TRANSPORT IS DEPRECATED Select From another Mac, PC, Time Machine backup, or other disk then select From a Mac, Time Machine backup, or startup disk.Before setting BCDEdit options you might need to disable or suspend BitLocker and Secure Boot on the computer.
#Target disk mode ethernet mac
In this scenario, your new Mac (which you're transferring data to) is the host and your old Mac (which you want to pull data from) is the target.Ĭonnect the target and host, boot the target into Target Disk Mode as normal, then on the host launch Migration Assistant under Utilities. There's no faster way to achieve this than with Target Disk Mode. If you've bought a new Mac, you're going to want to transfer your old data to it. Transferring Data With macOS Migration Assistant A wired transfer via Thunderbolt is much faster than a similar wireless transfer using the notoriously buggy AirDrop. This is most useful for large files like videos, media libraries, disk images, and so on. If you're used to transferring files between computers using intermediary media like an external hard drive, why not use Target Disk Mode instead? There's no need to copy from your Mac to a USB volume, then from the USB volume to your destination-simply move from Mac to Mac.
#Target disk mode ethernet how to
Now that you know how to use target disk mode, you should familiarize yourself with some of the applications for this boot mode.